Other products by Power HD
 reviews
2-4-6 Multibuy Discount
- buy at least 2, save 5%
- buy at least 4, save 10%
- buy at least 6, save 15%
|
|
Discounts are applied when you add to cart.
|
More Images (click to zoom):
|
Weight (g): |
10 |
|
Continous Current (Amps): |
8 |
|
Burst Current (Amps): |
10 |
|
BEC: |
Linear |
|
BEC Amps/Volts: |
5V / 1A |
|
BEC Servos Supported: |
2-3 |
|
Li-Po Cells: |
2-4 |
|
Ni-Mh/Ni-cd Cells: |
5-12 |
|
Voltage Cutoff: |
Programmable |
FEATURES: - Extremely low internal resistance
- Super smooth and accurate linearity and response
- Safety thermal over-load protection
- Auto throttle shut down when throttle signal is lost
- High RPM motor support
- Power arming protection (prevents the motor from accidentally running when switched ON)
- Advanced programming software
- Programmable via transmitter or the easy to use Power HD Program Card.
PROGRAMMABLE FEATURES: - Brake - On or Off
- Battery type - NiCd/NiMH or Li-Po
- Low Voltage Cut Off - 2.8V, 3.0V, or 3.2V
- Cut Off Behavior - Reduce Motor Power or Stop Motor
- Factory setting restore
- Timing - Auto, Low (7-22 degrees) or High (22-30 degrees)
- Rotation - Normal or Reverse
- Start-up Acceleration - Very Soft , Soft, Normal Start
- Governor Mode - Active RPM control for helicopters
- Switching Frequency - 8kHz or 16kHz
IMPORTANT NOTES: - You must calibrate your transmitter throttle with the ESC before flight.
- For Futaba users, please reverse your throttle channel, normally channel 3, on your transmitter before calibrating.
- When making programming changes, make ONE parameter change at time then power cycle the ESC between each change.
|